I've modified a pair of ladies-stretch-jeans, ( and it needs to be a ladies jeans, as there's no necessity to have room for cock & balls - right ) and changed them to work with the display-tube.
This leaves two opportunities, with or without vacuum applied to the cock, here I'll show you the one without vacuum.
And then the vacuumized option.
What I have done, is that I've purchased a pair of ladies stretch jeans - and
it needs to be a ladies jeans, as there's no necessity to have room for cock
& balls - right - and then I've cut out a hole exactly where the seams meet,
between the legs.
If you click the topmost left picture, you'll be able to see, where the hole is.
Subsequently I've sown in a circle of canvas, to strengthen the pants, and to
keep the hole from fraying. After all it's THE most stressed part of a pair of
jeans.. '
Finally I've applied two small buttonholes, in order to allow the padlock, to go
through the pants, thus locking the displaytube to the pants.
Click the pictures to see them full-size.
Click the link, to learn more about the display-tube. More
The trousers can - of course - also be used with other 'attachments'..!
Here i've pumped cock and balls out in the hyalite, and placed the opening in the trousers around tie 'top-rim' on the hyalite.
-and another option, using the carafe instead of the hyalite...
-and if I should be afraid of being overlooked in the streets, there's the option of putting a bicycle-diode-light into the carafe, prior to pumping it onto cock'n'balls ...
In good light...
-and in total darkness...
Close-up...
-in 'half-light'...
-and in 'almost darkness'...
-In case yoy're wondering why I'm so sure, that it will be noticed,
then click here: 
I've made myself a 'belt purse' which is a little alternative in it's design..*S*
It's made to work with my 'bottom-hole' jeans..*S*
Front, closed..
From the back, when closed..
From the front, open top..
-and I've 'secured' the zippers, to avoid 'getting stuck'..
Here with the 'bottom zipper' opened..
-with my cockhead 'secured' to the zippers, by means of my ampallang-piercing..
Here with my cockhead 'secured' - from the side.. -and with my cockhead 'un-secured'..
Of course I can show off 'the full Monty'
-then it looks like this, from the backside..
My 'open' jeans have many possibilities, and here is yet another one.
A detail, which I've gotten rather pleased with, is the way the 'strap' on the backside of the V shows off my butt:
And here you have the gadget, 'taken apart':
The V is made from a piece of 'artificial leather' from Stof2000, a handful of eyelets' + 4 pushbuttons from the same shop, as well as 2 shoelaces (one from tiger, the other one from the Danish military).
Version 2:
All of a sudden, I got the idea of adding a 'ball-splitter' to the gadget, and I dare say, that this works absolutely fine...
And here you get it 'without contents' to let you see what I've done to it.
Version 3:
As you can see from the above pictures (if you click them), the
ball-tightening-strap has become an integrated part of the V.
It is 'bound into' the cock corset.
I have previously mentioned the doggy-toy, named "KONG" - yes, it is actually called that...
In this edition, I've purchased another one, and have stuffed a valve down
the small opening, in stead of cutting it open, and using padlock(s) to secure
it.
In this way I simply attach my vacuum-pump-hose to the valve, and pump my dick
in, through the large hole, upon wich I un-mount the vacuum pump hose.
This - in effect - locks the cock inside the KONG.
I have previously mentioned the 'sausage board', and it's also a possibility, with the open jeans.
The bottom of the sausage-board, is bound to the belt, on the backside of the
jeans, as usually, and next the cock and balls are bound using a military boot
shoelace.
Finally the military boot shoelace is bound to the belt-straps, on the front
side of the jeans.
This leaves the cock and balls tightly bound, on the front of the jeans, in a manner which does not support a quick 'hide away'.
-is a vacuum-toy, which can also be applied to the jeans, with a kinky advantage.
The point is to suck the cock into the spherical bottle, in such a manner,
that the cock head is placed nicely in the middle of the sphere.
Now this gives a possibility to wear it 'downtown', provided that you choose the
right coat (of course).
Apart from the (pleasant) sensation of having the cock trapped in the sphere, it's possible to pull the glass sphere (with the cock inside it) out through the opening between the buttons in the coat...
Next